1. #11
    Avatar von skyrock007 Neuzugang
    Registriert seit
    Feb 2010
    Beiträge
    9
    Bei der Einstellung nur noch die Lenkung einstellen, so dass nur das Lenkrad einzeln als Einstellungsoption steht. Sollte das Lenkrad nicht zentriert sein, was ich öfters habe, dann das Lenkrad komplett nach Links und Rechts drehen. Das hift bei mir mit der Zentrierung.
    Share this post

  2. #12
    Avatar von Ubi-Duck Ubisoft Support Staff
    Registriert seit
    Jan 2019
    Beiträge
    1.617
    Hey skyrock007,

    vielen Dank für die umfangreiche Beschreibung.
    Ich hoffe, dass diese den Thread-Teilnehmern helfen kann!

    Gruß
    -Duck
    Share this post

  3. #13
    Avatar von MarcoR1511 Neuzugang
    Registriert seit
    Jul 2020
    Beiträge
    4
    Hallo Skyrock,
    ich habe TC2 auf dem Laufwerk D gespeichert und die Bindings sind wie bei dir im Dokumente Ordner auf C.
    Für das Lenkrad existiert auch nur eine Bindings Datei, die mit der Doppelbelegung, aber das Spiel greift nicht auf diese zurück, sodass im Spiel alle Tastenbelegungen leer sind.
    Wenn ich die Tasten neu zuordne, wird KEINE neu Bindings Datei angelegt !!
    Dementsprechend kann ich leider nicht versuchen, ob es mit copy paste wie du beschreibst funktionieren könnte.
    Share this post

  4. #14
    Avatar von MarcoR1511 Neuzugang
    Registriert seit
    Jul 2020
    Beiträge
    4
    Hey Skyrock,
    ich verwende die GHub mit meinem G29 Lenkrad für alle meine Rennspiele und habe nirgends Probleme.
    Ich habe auch bei TC2 keine Probleme! Ich habe nur nicht die Standardtastenbelegung!
    Die Bindingsdatei, welche in meinem Dokumente Ordner existiert sieht folgendermaßen aus:

    <?xml version="1.0"?>

    -<ActionConfig VERSION="2">


    -<ActionBinding State="ON" Name="ShortcutBindingsChannel">


    -<Action Name="BackOnTrack" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="FeedbackLogger" IsAnalog="0"/>


    -<Action Name="MainMenu" IsAnalog="0">

    <Channel Name="BUTTON11" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="GoogleMap" IsAnalog="0">

    <Channel Name="BUTTON9" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Nitro" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON1" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LightCallHorn" IsAnalog="0">

    <Channel Name="BUTTON24" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Minimap" IsAnalog="0">

    <Channel Name="BUTTON12" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LaunchPhotoMode" IsAnalog="0">

    <Channel Name="BUTTON23" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="ToolMenu" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON4" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="PaintBallMissile" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON3" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="FastFav1" IsAnalog="0"/>

    <Action Name="FastFav2" IsAnalog="0"/>

    <Action Name="FastFav3" IsAnalog="0"/>

    </ActionBinding>


    -<ActionBinding State="ON" Name="WheelBindings">


    -<Action Name="SteerLeftWheel" IsAnalog="1">

    <Operator Type="OR"/>

    <Channel Name="LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="SteerRightWheel" IsAnalog="1">

    <Operator Type="OR"/>

    <Channel Name="RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Clutch" IsAnalog="1">

    <Channel Name="RBWD" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="GearReverse" IsAnalog="0">

    <Channel Name="BUTTON19" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear1" IsAnalog="0">

    <Channel Name="BUTTON13" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear2" IsAnalog="0">

    <Channel Name="BUTTON14" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear3" IsAnalog="0">

    <Channel Name="BUTTON15" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear4" IsAnalog="0">

    <Channel Name="BUTTON16" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear5" IsAnalog="0">

    <Channel Name="BUTTON17" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Gear6" IsAnalog="0">

    <Channel Name="BUTTON18" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="Gear7" IsAnalog="0"/>

    </ActionBinding>


    -<ActionBinding State="ON" Name="CameraBindings">


    -<Action Name="NextCam" IsAnalog="0">

    <Channel Name="BUTTON22" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="OneShotLookL" IsAnalog="1" DeadZone="19.9999981"/>

    <Action Name="OneShotLookR" IsAnalog="1" DeadZone="19.9999981"/>


    -<Action Name="LookLeft" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LookRight" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LookUp" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LookDown" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="LookBehind" IsAnalog="0" DeadZone="19.9999981"/>

    <Action Name="CameraTrackIRLR" IsAnalog="1"/>

    <Action Name="CameraTrackIRUD" IsAnalog="1"/>

    </ActionBinding>


    -<ActionBinding State="ON" Name="DrivingBindings">


    -<Action Name="RoadThrottle" IsAnalog="1">

    <Channel Name="UP" Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadBrake" IsAnalog="1">

    <Channel Name="SLIDER1B" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadSteerLeft" IsAnalog="1">

    <Channel Name="LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadSteerRight" IsAnalog="1">

    <Channel Name="RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadLeanForward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadLeanBackward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadHandBrake" IsAnalog="1">

    <Channel Name="BUTTON2" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadGearUp" IsAnalog="0">

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RoadGearDown" IsAnalog="0">

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatThrottle" IsAnalog="1">

    <Channel Name="UP" Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatBrake" IsAnalog="1">

    <Channel Name="SLIDER1B" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatSteerLeft" IsAnalog="1">

    <Channel Name="LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatSteerRight" IsAnalog="1">

    <Channel Name="RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatLeanForward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="BoatLeanBackward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneThrottle" IsAnalog="1">

    <Channel Name="UP" Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneBrake" IsAnalog="1">

    <Channel Name="SLIDER1B" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneSteerLeft" IsAnalog="1">

    <Channel Name="LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneSteerRight" IsAnalog="1">

    <Channel Name="RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneLeanForward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneLeanBackward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneYawLeft" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneYawRight" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneAero" IsAnalog="1">

    <Channel Name="BUTTON2" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneToggleSmoke" IsAnalog="0">

    <Channel Name="BUTTON24" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="AirplaneToggleLandingGear" IsAnalog="0">

    <Channel Name="BUTTON21" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    </ActionBinding>


    -<ActionBinding State="ON" Name="FPSBindings">


    -<Action Name="FpsLookLeft" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsLookRight" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsLookUp" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsLookDown" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsMoveLeft" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsMoveRight" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsMoveForward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsMoveBackward" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Operator Type="AND"/>

    <Channel Name="BUTTON7" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON11" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsLeanLeft" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsLeanRight" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsAccelerate" IsAnalog="1">

    <Channel Name="UP" Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="FpsSlow" IsAnalog="1">

    <Channel Name="SLIDER1B" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="FpsCameraZoomIn" IsAnalog="1" DeadZone="19.9999981"/>

    <Action Name="FpsCameraZoomOut" IsAnalog="1" DeadZone="19.9999981"/>


    -<Action Name="FpsLeave" IsAnalog="0" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    </ActionBinding>


    -<ActionBinding State="ON" Name="HudBindings">


    -<Action Name="A" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON1" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="B" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON3" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="X" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON2" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="Y" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON12" Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="BUTTON4" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LB" IsAnalog="0">

    <Channel Name="BUTTON6" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RB" IsAnalog="0">

    <Channel Name="BUTTON5" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="START" IsAnalog="0">

    <Channel Name="BUTTON10" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LPAD_CLIK" IsAnalog="0">

    <Channel Name="BUTTON12" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LPAD_LEFT" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LPAD_RIGHT" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LPAD_UP" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LPAD_DOWN" IsAnalog="1" DeadZone="19.9999981">

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RPAD_CLIK" IsAnalog="0">

    <Channel Name="BUTTON20" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RPAD_LEFT" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON21" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RPAD_RIGHT" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON21" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RPAD_UP" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON21" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RPAD_DOWN" IsAnalog="1" DeadZone="19.9999981">

    <Operator Type="AND"/>

    <Channel Name="BUTTON21" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="DPAD_LEFT" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON20" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1LEFT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="DPAD_RIGHT" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON20" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1RIGHT" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="DPAD_UP" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON20" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1UP" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="DPAD_DOWN" IsAnalog="0">

    <Operator Type="AND"/>

    <Channel Name="BUTTON20" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    <Channel Name="POV1DOWN" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="RT" IsAnalog="1">

    <Channel Name="BUTTON7" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="LT" IsAnalog="1">

    <Channel Name="BUTTON8" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>


    -<Action Name="SELECT" IsAnalog="0">

    <Channel Name="BUTTON9" Device="Logitech G29 Driving Force Racing Wheel USB"/>

    </Action>

    <Action Name="PLAY" IsAnalog="0"/>

    <Action Name="PAUSE" IsAnalog="0"/>

    <Action Name="PS4_SHARE" IsAnalog="0"/>

    <Action Name="PCQuitGame" IsAnalog="0"/>

    </ActionBinding>


    -<ActionBinding State="ON" Name="TextChatBindings">

    <Action Name="SwitchChatState" IsAnalog="0"/>

    <Action Name="OpenInput" IsAnalog="0"/>

    <Action Name="ShowFilterSystem" IsAnalog="0"/>

    <Action Name="ShowFilterFriend" IsAnalog="0"/>

    <Action Name="ShowFilterCrew" IsAnalog="0"/>

    <Action Name="ShowFilterSession" IsAnalog="0"/>

    <Action Name="PrevFilter" IsAnalog="0"/>

    <Action Name="NextFilter" IsAnalog="0"/>

    </ActionBinding>

    </ActionConfig>

    Im Prinzip habe ich dieselbe Bindings Datei wie du auch.
    Ein kleiner Unterschied der mir allerdings auffällt, bei dir steht erst der "Device" und dann der "Channel Name" und bei mir ist das umgekehrt.

    Dementsprechend werde ich mal meine Bindings Datei kopieren und deinen skript in die kopierte Datei einfügen.
    Vielleicht klappt es, vielleicht nicht.
    Werde mich definitv nochmal melden dann.
    Share this post

  5. #15
    Avatar von MarcoR1511 Neuzugang
    Registriert seit
    Jul 2020
    Beiträge
    4
    Hey Skyrock, hey Ubi-Team,

    ich habe etwas interessantes herausgefunden.
    Ich hoffe das ist nur bei mir so, wenn das bei den anderen auch ist, dann sollte sich das mal bitte angeschaut werden.

    Und zwar, ich spiele TC2 seit TTS1 von 2017. Zu diesem Zeitpunkt besaß ich noch die Logitech Gaming Software. Man konnte ohne Probeleme mit dem G29 Lenkrad spielen, da eine Bindings Datei und somit eine Standardtastenbelegung eigenständig vom Spiel generiert wurde.
    Ende 2018 hatte TC2 ein Update und im Winter fiel mir auf, dass die gesamte Tastenbelegung leer gefegt wurde, sodass ich manuell eine eigene Tastenbelegung erstellte, aber ohne die Möglichkeit doppelte Tastenbelegungen zu machen.
    Anfang 2019 wechselte ich von der Logitech Gaming Software zur GHub und auch mit dieser fehlten die Standardbelegungen.
    Seit 2020 habe ich einen neuen PC und habe den Dokumente Ordner von TC2 vom alten PC in den Neuen übernommen.

    @Skyrock: Ich hatte vorher einmal geantwortet, dass ich ebenfalls in meinem Dokumente Ordner die Bindings Dateien habe.
    Ich besitze einmal die Bindings Datei für die Tastatur, einmal fürs Gamepad und einmal fürs Lenkrad.
    Die Bindings Datei fürs Lenkrad sieht zwar korrekt aus wenn man diese öffnet, allerdings wird diese vom Spiel gar nicht mehr benutzt!! Das ist die Datei, auf die das Spiel bis vor dem Update Ende 2018 zugriff. Seit diesem Update greift das Spiel aber nicht mehr auf diese Datei zurück, sodass die gesamte Tastenbelegung leer ist.

    Ich habe heute viel herum probiert und kann folgendes an alle Spieler mitteilen.
    Egal ob ihr die LGS oder die GHub oder beide benutzt, es wird keine Bindings Datei eigenständig vom Spiel fürs Lenkrad generiert!

    Ich habe den Dokumente Ordner von TC2 auf einen USB-Stick kopiert und im Dokumente Pfad gelöscht.
    Mein Lenkrad, mein Gamepad und logischerweise meine Tastatur waren alle angeschlossen und als ich dann das Spiel startete, existierte eine Standardtastenbelegung für die Tastatur und fürs Pad. Lenkrad blieb leer. Also habe ich das Spiel wieder geschlossen.
    Im Dokumente Ordner wurden auch nur zwei Bindings Dateien angelegt, für Tastatur und für Pad.
    Das heißt also, dass das Spiel keine Standardtastenbelegung fürs Lenkrad generiert!!
    @Ubi-Team: Bitte mal anschauen! Das dürfte so nicht richtig sein.
    @Skyrock: Bitte versuch du auch mal was passiert, wenn du den Ordner im Dokumente Pfad löschst und auf einem Stick sicherst und dann das Spiel startest.

    Also Spiel nochmal starten, Tasten manuell für Lenkrad zuordnen, Spiel wieder schließen und Ordner angucken.
    Jetzt ist auch eine Bindings Datei fürs Lenkrad vorhanden.

    Diese Bindings Datei habe ich dann mit dem Editor geöffnet, habe alles markiert und gelöscht und habe das Skript, welches von Skyrock hier im Forum reingestellt wurde eingefügt.
    Wenn man dann das Spiel startet hat man endlich wieder die Standardtastenbelegung!
    Die Anzeige der Belegung ist aber dennoch fehlerhaft!! Der Button "X" auf dem Lenkrad sollte auch als "X" im Spiel zu sehen sein und NICHT als "Button 1" !!
    @Ubi-Team: Auch das bitte anschauen!

    Ich weiß das ist viel Text und hier und da habe ich vielleicht auch ein bisschen drum herum geschrieben, aber ich versuche so gut wie möglich das für alle zu erklären, was Sache ist und was schon alles verscuht wurde!

    Für alle die die Standardtastenbelegung mit den doppelten Belegungen vermissen und wieder haben wollen, dies ist das Skript, welches ihr in die Bindigs Datei einfügen müsst:

    <ActionConfig VERSION="2">
    <ActionBinding Name="ShortcutBindingsChannel" State="ON">
    <Action Name="BackOnTrack" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    </Action>
    <Action Name="FeedbackLogger" IsAnalog="0" />
    <Action Name="MainMenu" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="GoogleMap" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON9" />
    </Action>
    <Action Name="Nitro" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON1" />
    </Action>
    <Action Name="LightCallHorn" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON24" />
    </Action>
    <Action Name="Minimap" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    </Action>
    <Action Name="LaunchPhotoMode" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON23" />
    </Action>
    <Action Name="ToolMenu" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON4" />
    </Action>
    <Action Name="PaintBallMissile" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON3" />
    </Action>
    <Action Name="FastFav1" IsAnalog="0" />
    <Action Name="FastFav2" IsAnalog="0" />
    <Action Name="FastFav3" IsAnalog="0" />
    </ActionBinding>
    <ActionBinding Name="WheelBindings" State="ON">
    <Action Name="SteerLeftWheel" IsAnalog="1">
    <Operator Type="OR" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="LEFT" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="SteerRightWheel" IsAnalog="1">
    <Operator Type="OR" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="RIGHT" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="Clutch" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="RBWD" />
    </Action>
    <Action Name="GearReverse" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON19" />
    </Action>
    <Action Name="Gear1" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON13" />
    </Action>
    <Action Name="Gear2" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON14" />
    </Action>
    <Action Name="Gear3" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON15" />
    </Action>
    <Action Name="Gear4" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON16" />
    </Action>
    <Action Name="Gear5" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON17" />
    </Action>
    <Action Name="Gear6" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON18" />
    </Action>
    <Action Name="Gear7" IsAnalog="0" />
    </ActionBinding>
    <ActionBinding Name="CameraBindings" State="ON">
    <Action Name="NextCam" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON22" />
    </Action>
    <Action Name="OneShotLookL" IsAnalog="1" DeadZone="19.9999981" />
    <Action Name="OneShotLookR" IsAnalog="1" DeadZone="19.9999981" />
    <Action Name="LookLeft" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="LookRight" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="LookUp" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    </Action>
    <Action Name="LookDown" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    </Action>
    <Action Name="LookBehind" IsAnalog="0" DeadZone="19.9999981" />
    <Action Name="CameraTrackIRLR" IsAnalog="1" />
    <Action Name="CameraTrackIRUD" IsAnalog="1" />
    </ActionBinding>
    <ActionBinding Name="DrivingBindings" State="ON">
    <Action Name="RoadThrottle" IsAnalog="1">
    <Channel Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB" Name="UP" />
    </Action>
    <Action Name="RoadBrake" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="SLIDER1B" />
    </Action>
    <Action Name="RoadSteerLeft" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="LEFT" />
    </Action>
    <Action Name="RoadSteerRight" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="RIGHT" />
    </Action>
    <Action Name="RoadLeanForward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="RoadLeanBackward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="RoadHandBrake" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON2" />
    </Action>
    <Action Name="RoadGearUp" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    </Action>
    <Action Name="RoadGearDown" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    </Action>
    <Action Name="BoatThrottle" IsAnalog="1">
    <Channel Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB" Name="UP" />
    </Action>
    <Action Name="BoatBrake" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="SLIDER1B" />
    </Action>
    <Action Name="BoatSteerLeft" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="LEFT" />
    </Action>
    <Action Name="BoatSteerRight" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="RIGHT" />
    </Action>
    <Action Name="BoatLeanForward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="BoatLeanBackward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="AirplaneThrottle" IsAnalog="1">
    <Channel Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB" Name="UP" />
    </Action>
    <Action Name="AirplaneBrake" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="SLIDER1B" />
    </Action>
    <Action Name="AirplaneSteerLeft" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="LEFT" />
    </Action>
    <Action Name="AirplaneSteerRight" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="RIGHT" />
    </Action>
    <Action Name="AirplaneLeanForward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="AirplaneLeanBackward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="AirplaneYawLeft" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    </Action>
    <Action Name="AirplaneYawRight" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    </Action>
    <Action Name="AirplaneAero" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON2" />
    </Action>
    <Action Name="AirplaneToggleSmoke" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON24" />
    </Action>
    <Action Name="AirplaneToggleLandingGear" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON21" />
    </Action>
    </ActionBinding>
    <ActionBinding Name="FPSBindings" State="ON">
    <Action Name="FpsLookLeft" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="FpsLookRight" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="FpsLookUp" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    </Action>
    <Action Name="FpsLookDown" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    </Action>
    <Action Name="FpsMoveLeft" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="FpsMoveRight" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="FpsMoveForward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="FpsMoveBackward" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON11" />
    </Action>
    <Action Name="FpsLeanLeft" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    </Action>
    <Action Name="FpsLeanRight" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    </Action>
    <Action Name="FpsAccelerate" IsAnalog="1">
    <Channel Type="COMBINED_INVERTED" Device="Logitech G29 Driving Force Racing Wheel USB" Name="UP" />
    </Action>
    <Action Name="FpsSlow" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="SLIDER1B" />
    </Action>
    <Action Name="FpsCameraZoomIn" IsAnalog="1" DeadZone="19.9999981" />
    <Action Name="FpsCameraZoomOut" IsAnalog="1" DeadZone="19.9999981" />
    <Action Name="FpsLeave" IsAnalog="0" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    </Action>
    </ActionBinding>
    <ActionBinding Name="HudBindings" State="ON">
    <Action Name="A" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON1" />
    </Action>
    <Action Name="B" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON3" />
    </Action>
    <Action Name="X" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON2" />
    </Action>
    <Action Name="Y" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Type="NOT" Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON4" />
    </Action>
    <Action Name="LB" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON6" />
    </Action>
    <Action Name="RB" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON5" />
    </Action>
    <Action Name="START" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON10" />
    </Action>
    <Action Name="LPAD_CLIK" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON12" />
    </Action>
    <Action Name="LPAD_LEFT" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="LPAD_RIGHT" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="LPAD_UP" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    </Action>
    <Action Name="LPAD_DOWN" IsAnalog="1" DeadZone="19.9999981">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    </Action>
    <Action Name="RPAD_CLIK" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON20" />
    </Action>
    <Action Name="RPAD_LEFT" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON21" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="RPAD_RIGHT" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON21" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="RPAD_UP" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON21" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    </Action>
    <Action Name="RPAD_DOWN" IsAnalog="1" DeadZone="19.9999981">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON21" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    </Action>
    <Action Name="DPAD_LEFT" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON20" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1LEFT" />
    </Action>
    <Action Name="DPAD_RIGHT" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON20" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1RIGHT" />
    </Action>
    <Action Name="DPAD_UP" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON20" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1UP" />
    </Action>
    <Action Name="DPAD_DOWN" IsAnalog="0">
    <Operator Type="AND" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON20" />
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="POV1DOWN" />
    </Action>
    <Action Name="RT" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON7" />
    </Action>
    <Action Name="LT" IsAnalog="1">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON8" />
    </Action>
    <Action Name="SELECT" IsAnalog="0">
    <Channel Device="Logitech G29 Driving Force Racing Wheel USB" Name="BUTTON9" />
    </Action>
    <Action Name="PLAY" IsAnalog="0" />
    <Action Name="PAUSE" IsAnalog="0" />
    <Action Name="PS4_SHARE" IsAnalog="0" />
    <Action Name="PCQuitGame" IsAnalog="0" />
    </ActionBinding>
    <ActionBinding Name="TextChatBindings" State="ON">
    <Action Name="SwitchChatState" IsAnalog="0" />
    <Action Name="OpenInput" IsAnalog="0" />
    <Action Name="ShowFilterSystem" IsAnalog="0" />
    <Action Name="ShowFilterFriend" IsAnalog="0" />
    <Action Name="ShowFilterCrew" IsAnalog="0" />
    <Action Name="ShowFilterSession" IsAnalog="0" />
    <Action Name="PrevFilter" IsAnalog="0" />
    <Action Name="NextFilter" IsAnalog="0" />
    </ActionBinding>
    </ActionConfig>

    Ich hoffe Skyrock und ich können weiteren Spielern hiermit unterstützen und ich hoffe auch, dass ihr vom Ubi-Team euch dieses Thema zu herzen nehmt und euch das mal anschaut.
    Wie schon beschrieben, ich habe viel ausprobiert und bin zum Ergebnis gekommen, dass das Spiel nicht mehr eigenständig eine Bindigs Datei und somit Standardtastenbelegung für das Lenkrad generiert!

    Gruß
    Marco
    Share this post

  6. #16
    Avatar von skyrock007 Neuzugang
    Registriert seit
    Feb 2010
    Beiträge
    9
    Hallo Marco,da kann ich dir nur zustimmen. Keyboard, X-Box werden die Einstellungen generiert. Beim Logitech Lenkrad dagegen nicht. Meine Bindingdatei wurde von meinem alten Pc übernommen. Ich habe eher den Eindruck, dass beim Installieren von LGS der Treiber für das Lenkrad korrekt installiert wird und auf das Lenkrad angewendet wird, aber die die LGS kein Einfluß auf das Lenkrad hat. Normalerweise erwartet man, dass die Software mit dem Lenkrad zusammenarbeitet und das dann in das Spiel integriert auch mit den korrekten Buttonbezeichnungen. Da schein keine Schnittstelle vorhandensein.
    Share this post

  7. #17
    Avatar von Ubi-Duck Ubisoft Support Staff
    Registriert seit
    Jan 2019
    Beiträge
    1.617
    Hey zusammen,
    vielen Dank für die umfangreichen Informationen!

    Eventuell kam es da zu Änderungen und es ist nicht richtig eingepflegt wurden.
    Ich werde es direkt an das Team weitergeben, damit es untersucht werden kann.

    Gruß
    -Duck
    Share this post

  8. #18
    Avatar von skyrock007 Neuzugang
    Registriert seit
    Feb 2010
    Beiträge
    9
    Hallo, habe mir heute von Logitech den LG Hub 2020.12.3534 vom 15.12.2020 heruntergeladen. Vorher die alte Logitechsoftware deinstalliert und im Ordner c/user/name/AppData/local entweder den Ordner Logitech oder LGHUB gelöscht. Nach dem Installieren die thecrew2.exe bei Videospiele und Apps hinzufügen. Auf Einstellungen und weiter auf App-Einstellungen permanentes Profil The Crew2 als Standard setzen. Die Buttonbelegung bleibt so wie vorher, aber Forcefeedback und die LED-Drehzahlanzeige funktionieren.
    Wäre mal schön ein Feedback von euch zu hören :-)
    Share this post